Setting Date And Time; Photo/Video Function - VOLTCRAFT BS-250XWSD Mode D'emploi

Setting date and time

1. Press the button MENU to call up the menu.
2. With the button ↓ or ↑, select the menu item "Setting" and press the release button to confirm.
3. Select the menu item "Time/Date" and confirm your selection. The day starts flashing.
4. Using the button ↓ or ↑, set the day and confirm your selection. The month starts flashing.
5. Proceed in the same way to set the month, year, hours, minutes and seconds.

12. PHoTo/VIdEo fuNCTIoN

Photo
1. Press the button MENU to call up the menu.
2. With the button ↓ or ↑, select the menu item "Camera" and press the release button to confirm. On
the top left of the display a photo camera icon appears.
3. Now press the release button to take a photo. When taking the photo, the photo camera icon
flashes in the display.
Zoom function:
The device is equipped with a zoom function: The magnification level is indicated on the monitor with
'x2', 'x3' and 'x4'. 'x4' represents the largest possible magnification.
1. Press and hold the button ↓ for approx. two seconds to switch from a magnification level to the
next higher level.
2. To return to normal image mode, set a magnification of 'x4' and press and hold the button ↓ for
approx. two seconds.
Video
1. Press the button MENU to call up the menu.
2. With the button ↓ or ↑, select the menu item "DVR" and press the release button to confirm. On the
top left of the display a video camera icon appears.
3. Now press the release button to record a video.
4. Press the release button again to end the video recording.
Zoom function:
The zoom function is explained in detail in the sub-section "Photo" and works just the same in video
mode. But please note that you cannot record videos with activated zoom.
123326_v5_1112_02_m_cs6.indb 25
25
11/8/2012 2:37:17 PM