Monitor Wristband; Connecting To A Tv; Care And Cleaning - VOLTCRAFT BS-200XW Notice D'emploi

11. Monitor wristband

1. Unwrap the wristband, position and fasten
it on your arm.
2. Mount the detachable display on the metal
plate. Observe the correct orientation, as
the metal point on the display should fit
into the hole on the plate. Slide the display
downwards to lock it onto the wristband.

12. Connecting to a TV

1. Connect the video cable jack with the matching socket on the endoscope and connect the
cinch plug with the video input of the TV set.
2. This will make the image on the display go off, and the camera image will then be displayed
on the TV screen.

13. Care and cleaning

• The device requires no servicing on your part apart from occasional cleaning. Only use a soft,
anti-static and lint-free cloth for cleaning.
• Do not use abrasive or chemical cleaners.
• Flush the gooseneck camera thoroughly with clean water after each use in liquids and dry it
off before returning it to the case.
• To clean the camera lens, use a small brush or cotton swab.
22