Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Main menu bar
File
Set Capture File
Allocate File Size
Save Captured Video
Exit
Options
Preview
Capture
Start Capture
Stop Capture
Set Frame Rate
Set Time Limit
Under the main window, the amount of the recorded images is displayed in the status line.
The supplied driver is „TWAIN32 compatible". Thus, the camera can be operated with
every program that supports this interface.
Snapshot
1.
In order to save individual pictures, press the key "7" on the endoscope. Another window
opens displaying the snapshot image.
2.
Under the menu point "File" you can save the picture (Save) or discard and exit (Exit).
3.
Under the menu point "Rotate orientation" you can rotate the picture.
The snapshot function can only be carried out with administrator rights. Contact your
system administrator for this.
Digital zoom
Press the "6" key to zoom in. The zoom can go up in four steps, then returns to the original zoom
level.
Accessories - Magnetic top, mirror top and hook top
To install an accessory, open it gently and mount it on the camera head. Do not bend
accessories excessively when opening. This could break the part.
Magnetic top
The magnetic top can be used to search for and find lost metal parts.
Mirror top
The mirror top can extend the sight of the endoscope into some places which are difficult to
access for the camera head.
Hook top
The hook top can help you grasp a tiny piece of object.
8.
MAINTENANCE AND CLEANING
The product requires no servicing on your part apart from occasional cleaning. Use a soft,
antistatic and lint free cloth for cleaning.
Rinse the gooseneck of the endoscope carefully with clean water after each application in liquids
and dry it before storing it in the case.
9.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Selection of the memory location for video
recordings (avi). The ending ".avi" must be
indicated.
Set the memory size The available size is
displayed.
Under the menu point "Capture File Size" the
size can
be entered.
Saving of a recorded video sequence.
Exit the program.
Real-time display in the main window.
Start of a video recording. Confirm the
displayed stor-
age location with "OK".
Stops the recording.
Set frame rate for the recording (frames/
sec.)
Input of a max. recording time in
seconds.
10.
TECHNICAL DATA
Resolution:
640 x 480 Pixel (VGA)
Frame rate:
30 fps (frames/sec)
Picture:
24 Bit RGB Colour (1/6" CMOS)
White comparison:
Automatic
Exposure to light:
Automatic
Video format:
AVI
Camera illumination:
2 LEDs, white
USB port:
USB 1.1
Power Supply:
5V via USB
Ambient/ operating
0 to +45°C
temperature:
Cable length:
approx. 200 cm
Total length of device:
115 cm
Effective length of endoscope: 96 cm
Minimum Bending radius:
6 cm
Diameter of camera head:
11.2 mm
Lens coverage:
54°
Focus:
> 6 cm
Weight without accessories:
approx. 415 g
Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2012 by Voltcraft®
Publicité
Table des Matières
