Mole Weighing; Item Settings - OHAUS Scout STX123 Mode D'emploi

STX
The sample weight is shown on the Main Display
Line.
3. Press Accumulate to add the weight of the
item to the total.
When stable, the new total is shown on the
secondary Display Line.
4. Remove the item from the weighing pan, then
add the next item and continue as above.
5. Press Result to view the accumulation results
and if needed print them out or save to a USB
flash drive.
6. When finished, press the Clear Result button.
A confirmation window will appear.
Press Yes to reset the total weight to zero.
Press No to return to the main screen.

4.9 Mole Weighing

Use this application to measure the amount of a sample.
1. In the upper left portion of the home screen, select Mole (if it does not appear, press the
More icon).
2. Press Molar Mass to set the Molar mass of the substance.
3. Place the substance on the pan to begin.
The Mole Weighing Home screen:

4.9.1 Item Settings

To view or adjust the current settings:
Touch the Item Settings button. The Settings
screen appears.
Liquid Volume: Set the Solution volume of
the Liquid if molarity info is required.
Sample Name: Enter a sample name.
1.800.561.8187
Main Display Line
Reference Fields
Application Buttons
www. .com
Application Icon
information@itm.com
EN-23