Glp And Gmp Data - OHAUS Scout STX123 Mode D'emploi

EN-36

5.2.6 GLP and GMP Data

Enter this menu to set the Good laboratory Practices (GLP) data.
Header
GLP Data Sub-menu
1.800.561.8187
Alternate Tare Command
Set the alternate command character for Tare.
Settings of A to Z are available. The default setting is empty, except
P&Z.
Alternate Zero Command
Set the alternate command character for Zero.
Settings of A to Z are available. The default setting is empty, except
P&T.
Print Settings Menu:
Note: If security switch is set to locked, the print Output-Stable setting is not reset.
A TAB delimiter is added between each data output.
Balance Name
Header
Enables the printing of GLP headings. There are up to 5 headings
available.
Alphanumeric settings up to 25 characters are
available for each Header setting. .
Balance Name
Set the balance identification.
Alphanumeric settings up to 25 characters are available.
The default setting is blank.
User Name
Set the user identification.
Alphanumeric settings up to 25 characters are available.
The default setting is Scout.
Project Name
Enter this menu to set the Project identification.
Alphanumeric settings up to 25 characters are available.
The default setting is blank.
Footer
Enables the printing of GLP headings. There are 2 headings available.
Alphanumeric settings up to 25 characters are
available for each Header setting. .
www.
User Name Project Name
.com
Footer
information@itm.com
STX