Glp And Gmp Data; Glp Data Sub-Menu; Header; Balance Name - OHAUS Adventurer Serie Mode D'emploi

EN-38

5.7 GLP and GMP Data

Enter this menu to set the Good Laboratory Practices (GLP) data and the Good Manufacturing Practices data.
5.7.1

GLP Data Sub-menu

Header

5.7.2
Enables the printing of GLP headings. There are up to 5 headings available.
5.7.3
Set the balance identification.
5.7.4
Set the user identification.
5.7.5
Enter this menu to set the Project identification.
Alphanumeric settings up to 25 characters are available. The default setting is blank.
5.8

Factory Reset

Use this sub-menu to reset the all menu settings to their Factory default settings.
Note: Calibration data is not affected.
Reset All
Exit
5.9

Lockout

Use this sub-menu to lock/unlock certain menus. Once locked, a small lock will appear on the menu icon
and the user will not be able to enter that menu.
Click on a menu and choose:
OFF
ON

Balance Name

Header
Alphanumeric settings up to 25 characters are available for
each Header setting.
Balance Name
Alphanumeric settings up to 25 characters are available. The default
setting is Adventurer.

User Name

Alphanumeric settings up to 25 characters are available. The default
setting is blank.

Project Name

= resets all menus to their factory default settings.
= return to application main screen without resetting any menus.
= the menu is unlocked
= the menu is locked
User Name
ADVENTURER BALANCES
Project Name