Check Weighing; Item Settings - OHAUS Adventurer Serie Mode D'emploi

EN-22
4.6

Check Weighing

Note: Before using any application, be sure the balance has been leveled and calibrated.
Check Weighing is used to compare the weight of a sample against target limits.
Check Weighing
1. In the upper left portion of the home screen, select Check Weighing
2. The default (or last) Check weight limits are displayed.
3. Place objects on the pan.
4. The Under/Accept/Over status is shown in the progress bar area while the actual weight of the item is
shown on the main Display Line.
To set the Over Limit value, touch the Over Limit button
To set the Under Limit value, touch the Under Limit button
A numeric input window appears.
Enter the desired Limit Weight, then press Save.
To return to the CHECK WEIGHING home screen,
touch Exit.
4.6.1

Item Settings

To view or adjust the current settings
Touch the Item Settings button. The Settings screen appears.
Sample Name: Assign a name to the sample.
Print settings: Change printing settings. See section
7 for more information.
The Check Weighing Home screen
Main Display Line
Reference Fields
Function Buttons
ADVENTURER BALANCES
Application
Icon