Features; Installation; Installing Components; Releasing The Transportation Lock - OHAUS Scout STX123 Mode D'emploi

EN-2 STX

1.4 Features

Touch Controls: Quick, graphical access to all
control functions, applications and features.
2.

INSTALLATION

2.1 Installing Components

Refer to the illustrations and instructions below to identify and assemble your Scout balance
with its components. All components must be assembled before using the balance.

2.1.1 Releasing the Transportation Lock

Release the red transportation lock on the
Sub-platform
sub-platform of the balance by turning the
Transportation
Lock Pointer
pointer 90 counter-clockwise.
Locked
Position
Unlocked
Position

2.1.2 Installing the Weighing Pan

Balances with a rectangular platform are placed into the sub-platform and rotated counter-
clockwise until it locks. Round platforms are placed straight down on sub-platform.

2.1.3 Security Slot

A security slot is provided at the rear of the balance allowing the balance to be secured by an
optional cable and lock accessory.
1.800.561.8187 information@itm.com
www. .com