Item Settings; Limits - OHAUS Scout STX123 Mode D'emploi

EN-20
The CHECK WEIGHING Home screen:

4.6.1 Item Settings

To view or adjust the current settings
Touch the Item Settings button. The Settings
screen appears.
Sample Name: Enter a sample name.
Weighing Units: Select the displayed unit.
Print Settings: To view or adjust the print
settings

4.6.2 Limits

To view or adjust the current settings
Touch the Limits button. The limits settings
screen appears.
The check limit values are displayed in the
settings screen.
To set the Over Limit value, touch the Over
Limit button and then enter the desired limit
weight.
To set the Under Limit value, touch the Under
Limit button and then enter the desired limit
weight.
When finished, press Exit to return to
application home screen.
Positive Check
Positive check is used to determine when the material added to the balance is within the target
range. In this case the UNDER and OVER limits must be positive values. (The OVER limit must
be greater than the UNDER limit.)
Add material to the balance until it is within the ACCEPT range.
1.800.561.8187
Main Display Line
Reference Fields
Application Buttons
www. .com
Application Icon
information@itm.com
STX