Menu Settings; Menu Navigation; Changing Settings - OHAUS PJX Serie Manuel D'instruction

EN-16

5. MENU SETTINGS

5.1 Menu Navigation

Calibration Setup
InCal Filter Level
Cal Adjust AZT
Span Cal Auto Tare
Linearity Cal Graduations
Date Format
Date Setting
Time Format
Time Setting
Brightness
Auto Dim
LFT

5.1.1 Changing Settings

To change a menu setting, navigate to that setting using the following steps:
Enter the Menu
Long press the Menu button to enter the Menu.
Select the Sub-Menu
Press No to step between the sub-menus, and press Yes to enter the sub-menu.
Select the Menu Item
Press No to step through the Menu Items, and press Yes to enter the displayed Menu Item.
5.2 Calibration
PJX balances offer a choice of three calibration methods: Internal Calibration (for InCal models only), Span
calibration and Linearity Calibration.
Attention: Do not disturb the balance during any calibration.
5.2.1 Calibration Sub-menu (InCal models)
Note: ExCal models only have Span Calibration and Linearity Calibration.
5.2.2 Internal Calibration (not applicable to ExCal models)
Calibration is accomplished with the internal calibration mass. Internal Calibration can be performed at any time,
provided the balance has warmed up to operating temperature and is level.
Unit RS232
Gram Baud Rate
Kilogram Parity
Milligram Handshake
Carat
Pound
Ounce
Ounce Troy
Pennyweight
Grain
TW Tael
Custom1
Print GLP
Stable Only Header 1
Numeric Only Header 2
Single Header Header 3
Balance
Auto Print
Name
User
Header
Name
Project
Date and Time
Name
Balance ID
Balance Name
User Name
Project Name
Application
Name
Result
Gross Weight
Net Weight
Tare Weight
Signature Line
Line Feed
PJX Series Balance
Reset Lock
Reset All Calibration
Setup
RS232
Print
GLP
Reset