Weighing Mode; Menu Structure; Menu Navigation - OHAUS Traveler TA152 Manual D'instructions

™
Traveler Scales

3.2 Weighing Mode

Press Unit to advance to next available weighing Unit.
Press Zero to zero the scale and then place objects to be weighed on the pan.
4. SETTINGS
The Settings allows the user to customize the scale.

4.1 Menu Structure

Table 4-1 illustrates the menu structure.
S.e.t.u.p
A-Off On
OFF OFF OFF OFF
SpaN
Press
Yes or No
Lin
Press
Yes or No
End
Press
Yes or No

4.2 Menu Navigation

Main level menus are identified by decimal points between each letter, for example
S.E.t.U.P].
S.E.t.U.P S.E.t.U.P
[S.E.t.U.P
Enter Menu:
Changing Settings: Within each main menu are sub-menus. Enter each sub-menu by
Menu Exit:
TABLE 4-1 MENU
U.n.i.t.
U.n.i.t On On On On
g
OFF
U.n.i.t On
N
OFF
OFF
End
Press
Yes or No
With the scale off, press and hold the On button. Continue holding
the On button until [S.E.t.U.P
entered by pressing Yes. Advance to the next main menu by
pressing No.
pressing Yes. Advance to the next sub-menu by pressing No. To
accept the displayed sub-menu setting, press Yes. To advance to the
next setting, press No.
The last item in each sub-menu is [EnD
main menu. The last item in the main menu is [E.n.D
return to the previous weighing mode.
E.n.d.
Press
Yes or No
OFF
OFF
S.E.t.U.P] is displayed. Each main menu is
S.E.t.U.P S.E.t.U.P
EnD]. Press Yes to return to the
EnD EnD
Notes: Notes: Notes: Notes:
Unit Symbol
Gram g
Newton N
Default menu settings are shown
in bold.
E.n.D]. Press Yes to
E.n.D E.n.D
EN-5
Factor
1
9.806e-3