Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Rotate the control dial until "BTA VOL"
appears, and rotate the volume control dial
to adjust the input level ("+18dB" – "0dB" –
"– 8dB").
Operating an audio device
with this unit
You can perform the following operations
on this unit if the audio device supports
AVRCP (Audio Video Remote Control
Profile) of Bluetooth technology. (The
operation differs depending on the audio
device.)
To
Skip albums
Repeat play
Shuffle play
Play
Pause
Skip tracks
Reverse/
Fast-forward
*1 Press repeatedly until the desired setting
appears.
*2 Depending on the device, it may be necessary
to press twice.
Operations other than the above should be
performed on the audio device.
Notes
• Depending on the audio device, information,
such as title, track number/time, playback
status, etc., may not be displayed on this unit.
The information is displayed during Bluetooth
audio playback only.
• Even if the source is changed on this unit,
playback of the audio device does not stop.
28
Do this
Press / (ALBUM /)
[press once for each album]
Press (REP)*
1
Press (SHUF)*
1
Press (PAUSE)*
this unit.
Press (PAUSE)*
this unit.
Press –/+ (/
) [press once for each
track]
Press and hold –/+
(/) [hold to
desired point]
Initializing Bluetooth
Settings
You can initialize all the Bluetooth related
settings (pairing information, preset
number, device information, etc.) from this
unit.
Press and hold for 1
1
second to turn off the power.
2
Press , rotate the control dial
until "BT" appears, then press it.
The menu list appears.
3
Rotate the control dial to select "BT
INIT," then press it.
The confirmation appears.
4
Rotate the control dial to select "INIT-
YES," then press it.
"INITIAL" flashes while initializing the
on
2
Bluetooth settings; "COMPLETE"
appears when initializing has finished.
on
2
5
Press
previous display.
Note
When disposing of this unit, preset numbers
should be deleted with "BT INIT."
(BACK) to return to the
Publicité
Chapitres
Table des Matières
Dépannage
