Using The Preset Dial; Music Streaming; Listening To Music From An Audio Device; Operating An Audio Device With This Unit - Sony MEX-BT5000 Mode D'emploi

Using the Preset Dial

Storing the Preset Dial
You can store a phone number in the phonebook
to the Preset Dial.
1 Select "Preset Dial" from the CALL menu.
2 Select the preset number (P1 – P6) to store,
then select "Preset Memory."
3 Select the name to store.
4 Select a phone number of the selected name.
5 Select "yes" when "Save?" appears.
Note
To replace a registered preset number, delete the
existing registration first, then store the new phone
number.
Deleting the Preset Dial
1 Select "Preset Dial" from the CALL menu.
2 Select the preset number to delete.
3 Select "Delete" c "yes."

Music streaming

Listening to music from an audio
device
You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Bluetooth technology.
1
Connect this unit and the Bluetooth
audio device (page 15).
" " appears during connection.
2
Turn down the volume on this unit.
3
Press (SOURCE) repeatedly until
"Bluetooth AUDIO" appears.
4
Operate the audio device to start
playback.
5
Adjust the volume on this unit.
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
To Do this
Skip tracks Push the joystick left/right.
Reverse/fast- Push and hold the joystick left/
forward a track right.
Press (6) (PAUSE)*.
Pause
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Note
Even if the source is changed on this unit, playback of
the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.

Other settings

Setting a handsfree device

You can set various functions when a cellular
phone compatible with the Bluetooth function is
connected as a handsfree device.
1
Press (Bluetooth).
The Bluetooth function menu appears.
2
Select "Phone Settings."
3
Select the desired menu.
4
Select the setting.
5
Press (Bluetooth).
Phone Settings menu
" " indicates the default settings.
z
Receive PB*
1 * 2 (Receive Phonebook)
To receive and store the phonebook data from a
cellular phone (page 16).
Auto Answer
– "on": to start a call automatically when
received. Set the time to start a call: "1 sec" –
"60 sec"
): to not start a call until (CALL),
– "off" (
z
(MENU) or (Bluetooth) is pressed.
Ringtone
To switch the ring tone.
– "Cellular* 3 " ( ): to output the ring tone set
z
with the cellular phone.
– "Default": to output this unit's ring tone.
continue to next page t
17