Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
99632241_FR_A.qxd
23/12/03
Minor troubleshooting
You have doubts about whether your hob is working correctly .... ...... this does not
necessarily mean there is a breakdown. Nevertheless, check the following points
ERROR
CODES
2 bleeps followed by
the displaying of F1 or F2
or F3 or F...
on the timer
, then
s h o w i n g
A2 or A2 or A...
You are unable to
control your hob and the
displays are blank.
shows E4 and
the hob bleeps. One of
the indicators for the
faulty burner lights up.
displays a fla-
shing time setting. (Time
remaining before the cur-
rent cuts off).
displays E2 or
E5, one of the indicators
for the faulty burner
flashes and you hear a
bleep.
displays E6.
displays E7:
one of the indicators
lights up to show the
faulty burner.
displays EE and
several indicators light up
to show the faulty bur-
ners.
- When an error code is displayed, this automatically prevents all use of the timer
.
14:43
Page 49
IF YOU REALIZE
THAT
This is the normal start-up procedu-
re for your hob when the power is tur-
ned on.
If you have pressed the main "Off"
button
then this is normal.
The current is cut off.
Your burner is unable to ignite.
You have suffered a power cut or
have pressed the main "Off"
button
.
The burner concerned is unusable.
However, you can still use the other
burners.
Your hob cannot be used.
You have a flame or a hot object on
one of the safety features (thermo-
couple).
The table has 2 faults.
WHAT SHOULD
YOU DO?
Wait for a few seconds until the
display goes out.
Your hob is ready to use.
Check that you have an electrical
current.
If you have current and the fault still
continues, call the After Sales Service
department.
Check that the gas is fully open or
that the burners are correctly assem-
bled.
Check that the injectors correspond
to the gas being used (please see the
technical characteristics table).
Check that there are definitely sparks
at the corresponding burner.
After carrying out all of these checks,
try to turn it on again by pressing
Press
to use your hob normally.
Call the After Sales Service dept, and
be sure to tell them which error code is
displayed.
Turn off the gas.
Call your After Sales Service dept.
and be sure to tell them which error co-
de is displayed.
Turn off the gas.
Call your After Sales Service dept.
Call the After Sales Service dept and
tell them which indicators have lit up.
49
.
Publicité
