Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
99632241_FR_A.qxd
23/12/03
Installing your hob in all simplicity
F
itting recommendations
Model
Cut-out
Outside
dimensions above
the work surface
Outside
dimensions below
the work surface.
This
appliance
installed
by
technician / installer.
Prior to installation, ensure that
the local distribution conditions
(nature of the gas and gas
pressure) and the adjustment
conditions of the appliance are
compatible.
The adjustment conditions are stated
on a label in the wallet and also on
the packaging.
Since this appliance is not connected
to a combustion products evacuation
device, it must be installed in
accordance with current installation
regulations and used in a well-
ventilated place. Particular attention
should be given to the relevant
requirements regarding ventilation.
32
14:41
Page 32
Width
Depth
56 cm
49 cm
65 cm
51,8 cm
55 cm
47 cm
should
be
On this subject, combustion can take
a
qualified
place only if oxygen from the air is
present, so this air must be
constantly
combustion products must be
evacuated (a minimum air input of 2
m3/hour per kw of gas energy is
required).
E.g. :
Total power :
0,85 + 1,5 + 2,3 + 3,1 = 7,75 kW.
7,75 kW x 2 = 15,5 m3/h minimum
airflow.
These hobs have type X protection
(in accordance with standard EN
60.335.2.6) against overheating of
cupboards and Class 3 for installation
itself (in accordance with standard EN
30.1.1).
Height
Depending on
cupboard
5 cm
5,1 cm
renewed
and
the
Publicité
