Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
99632241_FR_A.qxd
23/12/03
Using your hob in all simplicity
T
urning on the hob and adjusting the power setting
• Select the burner that you wish to use
by pressing on the corresponding
button (fig. 1).
The operating indicator for the bur-
ner lights up.
The power indicators for this bur-
ner will begin flashing.
• Choose the heater power setting by
selecting and pressing the buttons for
the burner power setting (fig. 2). The
power indicators stop flashing. Your hob
then automatically begins operating.
• You can adjust the power of the
burner by pressing on the
buttons.
This power setting is displayed on the po-
wer indication indicators.
Pressing on
for position 7
(fig 3).
Pressing on
(fig. 4).
• Locked : press for approximately
three seconds on the
controls will be locked except for the
On/Off
command for the burners
and the main "Off" button for the whole
cooker. After three seconds, the "Lock"
indicator lights up.
• Unlocked : press for approximately
three seconds on the
The indicator goes out. All of the controls
can once again be used on the hob.
- The flames on the burner are smaller near the grate supports to avoid any damage
being done to the enamel.
- In the event of accidental extinction (because of draughts for example), your cooker is
equipped with an automatic re-ignition system. This is limited to 2 successive re-ignitions.
- You can immediately turn off all burners by using the main "Off" button for the whole
cooker
.
14:42
Page 45
or
Fig. 3
for position 5
button. The
• Residual heat indicator
After intensive use, the cooking zone
may remain hot for several minutes.
(fig. 5).
The letter "
period. Do not touch the zones
concerned.
Fig. 1
Fig. 2
Fig. 4
Fig. 5
H" is displayed during this
H"
45
Publicité
