Publicité
Les langues disponibles
Les langues disponibles
Replacement of the demineralisation car-
tridge
Always switch off the appliance before removing
the water tank. Do not reach inside the nebuliser
en
space while the appliance is running!
Option B: Replace the resin
• Remove the water tank from the base and unscrew
the water tank cap (24) (Warning: msit outlet is loosely
inserted!).
• The demineralisation cartridge is attached to the inside
of the cap. Unscrew the cartridge from the cap by tur-
ning it anti-clockwise (25). Important: do NOT dispose
of the tank cap!
• Open the cartridge (26).
• Dispose of the contents of the cartridge (resin) (27)
Caution! Resin that lands on a smooth floor can be very
slippery!
• Cut the bag open at the marked point (28).
• Insert the piece of Styrofoam into the opening provided
for the purpose (29).
• Place the open bag over the cartridge and fasten it to
the cartridge right at the top using the rubber band
(30).
• Tip the replacement resin into the cartridge (31)
• Remove the bag, rubber band and Styrofoam piece
(32).
• Close the cap (33).
• Soak the demineralisation cartridge in a bowl of water
for at least 24 hours before use (21). The resin has to
absorb water to achieve full performance!
• Now screw the cartridge onto the water tank cap (34).
Close the tank cap securely! Place the water tank onto
the base and insert the mist outlet (23).
22
All manuals and user guides at all-guides.com
24
25
26
28
27
29
30
a
31
32
33
34
Publicité
