Menu Option; User Menu; Menu 1. Clock; Menu 2. Programme Adjustment (Timetable Schedule Of The Thermo-Stove) - Bio Bronpi HYDRO Série Instructions D'installation, D'utilisation Et D'entretien

Button Description
Decreases power
5
6 Increases power
NOTE: You can get access into menu from the remote control but you have to approach to the display to see the content of it.
9.4

MENU OPTION

Pressing button nº 3 of display we can access to the MENU. It is divided into different sections and levels that allow access to the thermo-
stove configuration and programming.
The access to the technical programming of the boiler is protected by a password. These parameters should be modified only by an
authorised technician. (The changes in these parameters could cause incorrect operation of the thermo-stove and the subsequent loss of its
warranty.)
9.4.1

USER MENU

The following table briefly describes the menu structure in the thermo-stove. In the attached table, only the options available to the user are
specified.
9.4.2

MENU 1. CLOCK

The clock sets the time and date. To set up the clock you have
to move through the different submenus and introduce the data,
changing values with buttons 1 and 2. The card has a lithium battery
that allows the clock to work for 3/5 years (see drawing D29).
9.4.3

MENU 2. PROGRAMME ADJUSTMENT (TIMETABLE SCHEDULE OF THE THERMO-STOVE)

IMPORTANT NOTE: Before starting the set up of the thermo-stove, please check that the time and date shown are correct this becomes vital
for the default settings of the programmes. Otherwise, the selected programming would be set up depending on the time and date set and
this may be incorrect for you.
The following table briefly describes the programming menu structure in the boiler or thermo-stove and where options can be selected.
MENU
02 - Programme setting
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Mode
ON/OFF
MENU
PROGRAMMING
ON/OFF
MENU
PROGRAMMING
Menu
01 - Clock adjustments
01- Day
02- Hour
03- Minute
04- Day
05- Month
06- Year
02 - Programme setting ** See point 10.4.3.
03 - Select Language
01 - Italian
02 - French
03 - English
04 - German
05 - Portuguese
06 - Spanish
04- Stand-by Mode ON/OFF
05 - Sound mode ON/OFF
06 - Initial load Set
07 - Stove State Provides information on the status of the thermo-
stove.
Sub-menu 1.
1- Set up chrono
2- Daily programme
3- Weekly programme
Performance description
Decreases the output value of the thermo-stove.
Moves to the previous menu option.
Goes back to the previous submenu value.
Increases the output value of the thermo-stove.
Moves to the following menu option.
Moves to the following submenu option.
Submenu
06
Menu 01
MONTH
CLOCK
Sub-menu 2.
01- Set up chrono
01 - PROG daily
02- Start 1 Day
03- Stop 1 Day
04- Start 2 Day
05- Stop 2 Day
01 - PROG Weekly
33
VALUE
ON/OFF
ON/OFF
Hour
Hour
Hour
Hour
ON/OFF
HYDRO SERIES
D29