Functions Of The Display's Buttons; General Information Of The Remote Control - Bio Bronpi HYDRO Série Instructions D'installation, D'utilisation Et D'entretien

Drawing D26 shows the numbered keys and the layout of the
messages during programming or configuration of the working
parameters. Particularly:
1. The screen area marked "VALUE" shows the value that we
introduce.
2. The screen area marked "MENU LEVEL" shows the current
menu level.
Drawing D27 shows the meaning of the symbols appearing on the left hand
side of the screen. The screen lighting in the section "status" shows the
activation of the corresponding device according to the following list.
9.2

FUNCTIONS OF THE DISPLAY'S BUTTONS

Button Description
Increases
*1
temperature
Decreases
*2
Temperature
3 Menu (Set)
ON/OFF
4
Unblocking
Decreases power
5
Increases power
6
(1) Pressing button nº 1 only one time we entry to the adjustment of the water temperature.
(2) Pressing button nº 2 only one time we entry to the adjustment of the room
temperature.
9.3

GENERAL INFORMATION OF THE REMOTE CONTROL

The model Omega-H has not this remote control.
The thermo-stoves are provided with a remote control by infrared to control
your thermo-stove from distance (see drawing D28). Buttons functions are the
following:
Button Description
Increases
1
temperature
Decreases
2
Temperature
ON/OFF
3
Unblocking
4 MENU
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Mode Performance description
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Increases the ambient thermostat temperature value.
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Decreases the ambient thermostat temperature value.
- Access the menu.
MENU Access the following level in the submenu.
PROGRAMMING Confirms the selected value and move to the following option in the menu.
WORKING It switches on or off the thermo-stove pressing 2 seconds.
BLOCKING Unblocks the boiler and switches it off.
MENU / PROGRAMMING Goes back to the previous level menu and saves the modified data.
ON/OFF Decreases the output value of the thermo-stove.
MENU Moves to the previous menu option.
PROGRAMMING Goes back to the previous submenu value.
ON/OFF Increases the output value of the thermo-stove.
MENU Moves to the following menu option.
PROGRAMMING Moves to the following submenu option.
Mode
PROGRAMMING
ON/OFF
PROGRAMMING
ON/OFF
WORKING
BLOCKING
MENU / PROGRAMMING
-
MENU
PROGRAMMING
VALUE
STATE
PROGRAMMING ACTIVATED
RESISTOR/LIGHTER
ENDLESS/AUGER
SMOKE EXTRACTOR
HEAT EXCHANGER
PUMP
ALARM
Performance description
Modifies/Increases the value of the selected menu.
Increases the ambient thermostat temperature value.
Modifies/Increases the value of the selected menu.
Decreases the ambient thermostat temperature value.
It switches on or off the thermo-stove pressing 2 seconds.
Unblocks the boiler and switches it off.
Goes back to the previous level menu and saves the modified
data.
Access the menu.
Access the following level in the submenu.
Confirms the selected value and move to the following option in
the menu.
32
MENU LEVEL
DIALOGUE
(ONLY IN AIR SERIES STOVES)
HYDRO SERIES
D26
D27
D28