Husqvarna 535iFR Manuel D'utilisation page 13

2. Turn the handlebar until it is parallel to the shaft.
3. Turn the handlebar around the shaft.
4. Tighten the knob.
To assemble the cutting equipment
The cutting equipment includes a cutting attachment and
a cutting attachment guard.
WARNING: Stop the product and remove
the battery. Use protective gloves.
WARNING: Always use the cutting
attachment guard that is recommended for
the cutting attachment. See
page 29 .
WARNING: An incorrectly attached cutting
attachment can result in injury or death.
Cutting equipment and guards
WARNING: Stop the product and remove
the battery. Use protective gloves.
The product have different cutting attachment guards for
the cutting equipment that can be used. Make sure that
you use the correct cutting attachment guard for the
cutting equipment. Refer to
• Grass blade guard and grass blade.
• Trimmer guard and trimmer head.
609 - 003 - 11.12.2019
Accessories on
Accessories on page 29 .
• Saw blade guard and saw blade.
Assembly of the grass blade guard and the
grass blade
To attach the grass blade guard
• Put the grass blade guard (A) onto the shaft and
tighten the bolt.
To remove the grass blade guard
• Remove the bolt and remove the grass blade guard
(A) from the shaft.
To attach the grass blade
1. Put the gear of the product on a flat surface to make
sure that the blade is assembled correctly.
A
A
13