Avtech IP CAMERA Serie Guide D'opération page 32

3.7.2 Push Video (For selected models only)
"Push Video" is an active notification system integrated with smart phones. Users are able to receive alarm
notifications within 5 seconds after event occurrence, check what happened with video playback, and take
actions immediately.
Note: For Push Video to work properly, make sure the record function is on in "Record"  "Record", and
the record timer for the external alarm is on in "Record"  "Record Timer".
Note: When the camera is configured, go to your smart phone and enable "Push Video". For details,
please refer to "APPENDIX 8 ENABLE PUSH VIDEO" at page 50.
Item
Guard
Slow Shutter Lock
Guard Rule
Message
To configure Push video to enable in the specified time, select "Yes" to enable the timer function, and select the
time you want to enable.
Description
Select to enable or disable Push Video. This function can also be enabled from your iPhone or Android mobile devices.
When this function is enabled, the image resolution is fixed to "VGA".
Select to fix the slow shutter level to level 2 (Enable) or remain the current slow shutter level (Disable) when Push Video
is enabled.
When this function is enabled, it could ensure Push Video recording to get clear images when the environment is dark.
This function is set to "Enable" by default.
Select the rule to enable Push Video from "External Alarm".
Define the context when you receive the Push Video message on your iPhone or Android mobile device. Up to 28
characters are allowed.
26