Avtech IP CAMERA Serie Guide D'opération page 29

3.5 Record
3.5.1 Record
In "Record Configuration", you can:
 Enable or disable the alarm record function. When "Enable" is set to "No", the alarm record function is
disabled even if you enable it in other configuration pages.
 Select if the data should be overwritten when the memory storage is full.
 Enable or disable the audio record function.
Note: Audio recording is available for selected models only.
 Select the video resolution for event recording.
Note: The higher resolution you choose, the more accuracy and higher image quality the recording will
be, but the faster the memory storage is consumed and become full
Type 1
3.5.2 Record Timer
To schedule alarm and motion recording, enable it, and select the day and time for recording.
Note: The timer must be enabled for the record function to work properly.
Note: The timer for external alarms is for selected models only.
Note: The selected time will be yellow-colored.
Type 2
23