Avtech IP CAMERA Serie Guide D'opération page 144

3.2.8 Filtre
Permet de filtrer l'accès à la camera.
.
Champ Description
 Filter Configuration
Error Count Set the maximum count for login failure. When the maximum count is reached, the IP address trying to access the
network camera will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address is reached.
Echo Request Select "Non-Block" to allow other users to use the ping command to detect the IP address of your network camera, or
"Block" to deny the ping command request.
 IP/MAC Filter Configuration
IP/MAC Filter Choose to enable or disable the filter function.
IP/MAC Filter Policy If "Enable" is selected, choose whether you want to permit (Allow) or block (Deny) the IP address list below.
 IP/MAC Filter Rules
To add an item to the IP address list, key in the IP address in "Rule", and click "Add".
‧
Rule
To remove an existing item in the IP address list, click the item you want to remove, and click "Delete".
‧
12