Publicité
Les langues disponibles
Les langues disponibles
3. CAMERA CONFIGURATIONS
Users can further configure this network camera by accessing via Internet Explorer.
3.1 System configuration menu
Click "Config." to enter the configuration page.
The functions are categorized into seven menus: Network, Camera, VA, Record, Storage, Trigger and General.
For details about "Network", please refer to "3.2 Network" at page 10.
For details about "Camera", please refer to "3.3 Camera" at page 17
For details about "VA", please refer to "3.4 VA (For selected models only)" at page 22.
For details about "Record", please refer to "3.5 Record" at page 22.
For details about "Storage", please refer to "3.6 Storage" at page 23.
For details about "Trigger", please refer to "3.7 Trigger" at page 24.
For details about "General", please refer to "3.8 General" at page 27.
Main Menu
Sub-Menu
Network
Network
QoS
DDNS
SNTP
FTP
Mail
SMS
Filter
UPnP
Bonjour
RTP
SNMP*
IEEE 802.1X*
Network Share*
Network Failure Detection*
Cloud*
Camera
Camera
Video
ROI*
Color
Audio*
Advanced
Privacy Mask*
VA*
TA*
DIS*
*Selected models only
Reference
Configure network settings.
If you want to connect the camera to the internet by using our free cloud service, EaZy
Networking, please enable EaZy Networking here.
Limit the data flow for live streaming.
Enter DDNS information when the network type is PPPOE or DHCP.
Synchronize your camera time with the networked computer systems.
Enter the FTP information for event notifications when "FTP" is chosen in "Trigger" →
"Trigger".
Enter Email information for event notifications when "Email" is chosen in "Trigger" → "Trigger".
Enter text messaging information for SMS notifications when "SMS" is chosen in "Trigger" →
"Trigger".
Choose to permit or block the IP address(es) which can access this camera.
*Suitable for Windows-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
*Suitable for Apple Mac-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Set the parameters for video data transmission when you're using multimedia other than web
browsers and Video Viewer for remote access.
Configure SNMP to remotely manage network devices.
The settings here enable the camera to access a network protected by 802.1X/EAPOL
(Extensible Authentication Protocol Over LAN).
Assign a location in the LAN environment to save the snapshot of events when "Network
Share" is chosen in "Trigger" → "Snapshot".
Configure this camera to check the network connection of other device periodically, and send
notifications via Email or FTP for disconnection events.
This camera supports a third-party cloud service, Angelcam, to easily connect the camera
online and see its live view on your mobile device.
1. Rename the camera.
2. Change the place where the camera name is shown on the screen.
Adjust video-related settings in different video format.
Select a specific area to reinforce the image quality of that area.
Adjust the color performance.
Adjust the audio volume of the microphone and speaker.
Adjust the camera parameters if necessary.
Cover certain areas on the camera image.
This function should be used with the mini-guard control switch for alarm system integration.
For details, please check with your distributor or installer.
Enable this function to reduce blurring associated with the motion of a camera during
exposure.
8
Publicité
