Publicité
Les langues disponibles
Les langues disponibles
Cleaning the covers
The removable covers
on the care label.
1. To remove the covers from the device, open the zip fastener on the covers
2. Wash the covers by hand.
3. Allow the covers to dry. Only insert the covers into the device again when they are completely dry.
4. Ensure that the zip fasteners of the covers are firmly attached to the device.
Storage
The device is intended to be part of your living space, even when the massage function is not being used.
Store the device away from children and pets. Do not place any objects on the device.
8. WHAT IF THERE ARE PROBLEMS?
Problem
The massage heads
are rotating too
slowly
The massage heads
do not move
9. DISPOSAL
For environmental reasons, do not dispose of the device in household waste at the end of its service life.
Dispose of the device at a suitable local collection or recycling point in your country. Observe the local
regulations for material disposal. Dispose of the device in accordance with EC Directive Waste
Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local
authorities responsible for waste disposal. You can obtain the location of collection points for old
devices, for example, from the local or municipal authorities, local waste disposal companies or
your retailer.
Spent batteries and rechargeable batteries do not constitute normal household waste! They are conside-
red to be toxic waste and, as such, should be disposed of in special containers, toxic waste
collection points or brought to electrical goods dealers. Note: Batteries containing pollutant
substances are marked as follows: Pb = Battery contains lead, Cd = Battery contains cadmi-
um, Hg = Battery contains mercury.
of the massage heads can be washed by hand. Observe the care instructions
4
Possible cause
The load on the massage heads is
too great
The device is not connected to
mains power supply.
Overheating protection has been
triggered
.
4
Solution
Free up massage heads
Plug the mains adapter into a suitable
socket and switch on the device
Disconnect the device from the power
supply, wait at least 15 minutes, then
plug in again and switch on
Publicité
