Télécharger Imprimer la page

Beurer FM 120 Mode D'emploi page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Step 4: Setting the mode
The device has three different massage modes. Select a mode using the mode button
Mode 1:
lights up green,
Mode 2:
does not light up,
Mode 3:
lights up green,
Step 5: Adjusting the intensity
For the air pressure massage, the foot massager has three intensity levels (low, medium, high). Select your
desired intensity level using the intensity button
lights up faint green
lights up normal green
lights up intensely green = high intensity of air pressure massage
Step 6: Switching the heat function on/off
The foot massager has an optional heat function to warm up your feet during the massage. To switch the
heat function on or off, press the heat button
lights up red
does not light up = heat function switched off
Step 7: Switching off the device
To switch off the device after use, press the ON/OFF button
starts to flash green. The device is now in standby mode. Remove the mains adapter from the mains
socket.
6.3 Use of stool function
 CAUTION
The stool function is suitable up to a body weight of 100 kg. Never stand on the stool. Do not let your full
body weight fall onto the stool.
Between your massages, you can use the device as a comfortable stool.
1. To do so, store the mains cable and the mains adapter in the foot section of the device.
2. Close the lid
. You can now use the device as a stool. It is suitable for sitting on or resting your legs.
1
7. CLEANING AND MAINTENANCE
Cleaning the device
 WARNING
Unplug the device each time before cleaning. Clean the device using only the methods specified. Liquid
must not penetrate the device or the accessories under any circumstances.
1. Clean the device with a slightly damp cloth.
2. If it is very dirty, you can also moisten the cloth with a mild soapy solution.
lights up faint green = massage and air pressure
lights up faint green = air pressure only (without massage)
does not light up
= low intensity of air pressure massage
= medium intensity of air pressure massage
= heat function switched on
= massage only (without air pressure)
.
8
during the massage.
7
. The ON/OFF symbol (
10
19
.
9
) on the device

Publicité

loading