Playing Only The Tracks In The Desired Group - Sony MDS-JB980 Mode D'emploi

Playing only the tracks in
the desired group
This function allows you to listen only to your
favorite tracks which you have registered into a
group.
1
Do steps 1 to 3 of "Playing an MD" on
page 19.
2
Press GROUP ON/OFF.
The GROUP ON/OFF button lights up. The
disc name and the total number of groups
appears.
3
Press PLAY MODE repeatedly until the
mode you want appears.
Select
Blank (no PLAY
MODE indication)
SHUF
PGM
4
Press GROUP SKIP repeatedly until the
group you want to play appears.
5
Press H.
6
Adjust the volume on the amplifier.
The deck stops when playback of the last
track in the group ends.
22
GB
To play
The tracks in the group in
the original order.
The tracks in the group in
random order.
The tracks in the group in
the order you want (see
"Creating your own
programme" on page 23).
Tip
You can perform the operations described under
Repeat Play (page 19), Other Operations (page 20)
and Programme Play (page 23) only for the tracks in
the group.
Note
If you select and play a group that does not have any
tracks registered, play starts from the first track of the
first group on the MD.
Notes when using a remote (RM-TP501,
RM-TP502, RM-TP503, RM-TP504) supplied
with a Sony amplifier or tuner
• When the Group function is on, if you select and
play a track using any of the above remotes, the
Group function automatically turns off.
• When the Group function is on, the remote display
for the track number being played may differ from
the deck display.