Playing Mds; Loading An Md; Play/Repeat Play - Sony MDS-JB980 Mode D'emploi

Playing MDs

Loading an MD

Load an MD as illustrated below.
With the labelled side up
With the arrow pointing
toward the deck
Playing an MD
— Normal Play/Shuffle Play/Repeat
Play
1
Turn on the amplifier and select MD on
the amplifier.
2
Press ?/1 to turn on the deck.
The STANDBY indicator turns off.
3
Load an MD.
4
Press PLAY MODE repeatedly until the
mode you want appears in the display.
Select To play
Blank (no PLAY The MD in the original order
MODE indication)
SHUF The tracks in random order
PGM The tracks in the order you
want (see "Creating your own
programme" on page 23)
5
Press H.
The deck starts to play.
6
Adjust the volume on the amplifier.
Repeat Play Operations
To Do the following:
Repeat only Press REPEAT repeatedly until
one track "REP1" lights up in the display.
Repeat all Press REPEAT repeatedly until
tracks "REP" lights up in the display.
Cancel Repeat Press REPEAT repeatedly until
Play "REP1" or "REP" disappears.
1 While the deck is playing, press
Repeat a
AyB on the remote at the
specific
portion within starting point (point A) of the
portion to be played repeatedly.
a track (Repeat
A-B Play) "REP A-" lights up and "B"
flashes in the display.
2 Continue playing the track or
press m/M to locate the
ending point (point B), then
press AyB on the remote.
"REP A-B" lights up and Repeat
A-B Play starts.
Cancel Repeat Press REPEAT or CLEAR.
A-B Play
continued
19
GB