Abicor Binzel xFUME ADVANCED HP 230V-CSA Mode D'emploi page 26

11 Disassembly
11 Disassembly
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can start running
unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
EN - 26
CAUTION
xFUME™ ADVANCED HP 230V – CSA
Disconnect the compressed air supply.
1
Remove the current clamp from the cable
2
assembly.
Remove the extraction hose(s).
3
Loosen the bottom clamp on both sides. Loosen
4
the side clamps on both sides and remove the
housing.
Loosen the castors.
5