Ducati Pro-I Evo Black Edition Mode D'emploi page 37

Les langues disponibles

Pro-I Evo AS

Display communication error

Motor current sensor error

Accelerator sensor error

Brake sensor error

Motor sensor error

BMS communication error

High-voltage main line error

High controller temperature error

Indicates a possible break in communication between

the electric scooter display and the control unit,

causing loss of information. Check the connection

between the display and control unit, or request

technical assistance.

Indicates a fault in the electric scooter motor current

sensor. Check the motor wiring, or seek technical

Indicates a fault in the acceleration sensor of the

electric scooter. Check the sensor and wiring, or seek

technical assistance.

Indicates a fault in the brake sensor of the electric

scooter. Check sensor and wiring, or seek technical

If the error occurs at start-up, check that the motor

hall wiring is normal. If it occurs during braking, check

and replace the motor or controller to resolve the

problem, or request technical assistance.

Request technical assistance.

If the error occurs at start-up, check if the battery

voltage is normal. If it occurs while driving, you will

need to replace the battery or controller to solve the

problem, or request technical assistance.

If the controller temperature is too high, switch off

the vehicle and let it cool down before restarting it.

If the error occurs at start-up, the controller will have

to be replaced to solve the problem.