Ducati Pro-I Evo Black Edition Mode D'emploi page 14

Steering column stability.
Model
Pro-I Evo
(Black and White
edition)
Pro-I Evo SR
(Black and White
Edition)
Pro-I Evo AS
Pro-I Evo Max SR
Pro-II Plus
Pro-II Plus AS
Pro-II Evo
Pro-II Evo AS
Pro-III
Pro-III R
CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with
assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.ducatiurbanemobility.com for
technical support.
Keep children away from plastic items (including packaging materials) and small parts that may result in suffocation.
Reference picture * Adjustment
Adjusting the handlebar stem:
If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism, by
tightening or loosening it as required to increase
the stability of the steering column.
Adjusting the handlebar stem:
As shown in the figure, if the steering column
vibrates during use, adjust the screw (if present)
using the hexagon wrench.
Adjust the handlebar:
If the handlebar stem vibrates during use, adjust
the screw by means of the hexagon wrench as
illustrated in the figure.
13