Publicité
Les langues disponibles
Les langues disponibles
CAUTION
Prior to using the item for the first time, charge to 100%. Make sure that the item, the battery charger and the charging port
are dry.
Instructions:
- Open the kickstand
- Switch off the item
Battery charging
CAUTION
Charge the device before the first use. We also recommend charging it after each use and before storing it. Allow the vehicle
to discharge completely to prevent damage to the battery.
The red light on the charger will turn green when charging is complete.
Model
Reference picture
Pro-I Evo
(Black and
White edition)
Pro-I EvoSR
(Black and
White edition)
Pro-I Evo
Max SR
Pro-I Evo AS
Pro-II Plus
Pro-II Plus AS
Pro-II Evo
Pro-II Evo AS
Pro-III
Pro-III R
4. Battery charging
17
Instructions
1. Remove the rubber cover from the charging
socket.
2. Connect the battery charger to the electrical
outlet and then to the charging socket. When
the item is fully charged, the light on the
charger changes from red (charging) to green
(charging complete).
3. After charging, disconnect the battery charger
from the vehicle and reinsert the rubber
cover. Unplug the battery charger from the
electrical outlet.
Do not switch the scooter on while it is charging.
CAUTION
The red light on the charger will turn green when
charging is complete.
1. Switch off the electric scooter and open the
kickstand.
2. Turn the Ducati logo, open the waterproof
cover, then connect the battery charger to the
electrical outlet, connect the connector to the
charging port.
3. After charging, disconnect the connector from
the charging port, close the waterproof cover.
Publicité
