Ducati Pro-I Evo Black Edition Mode D'emploi page 12

Model Reference picture
Pro-III
MN-DUC-PRO3
DU-MO-210013
DU-MO-220006
DU-MO-220021
DU-MO-220024
Pro-III R
DU-MO-220003
*Pro-II Plus AS (DU-MO-220020 – DU-MO-220026) / Pro-II EVO AS (DU-MO-220012)
Electronic horn.
USB charging port
(lower side, under the
rubber protection)
Left button:
Press and hold to activate
anti-theft mode.
Charging the device: Insert the USB cable into the charging port (lower side).
In the package
Accessories:
- Allen keys
- Components for handlebar
assembly (hook, plastic
parts, screws)
- Tyre inflation adapter
- Charger
- 2 RF keys for scooter
ignition
11
Handlebar assembly
Method:
1. Open the kickstand
2. Pick up the handlebar, place
the lever in the closed position
and lower the safety ring.
3. Connect the light cable to the
display wiring and insert the
handlebars into the column.
4. Install the hook on the
column, making sure that it
is aligned with the holes, and
insert the 2 M6 screws.
5. Insert the M6 screw on the
outside into the hole located
under the control panel and
tighten all three M6 screws.
Right button:
Press and hold to deactivate
anti-theft mode.
Central button (Horn):
• Press to sound the horn.
• Press twice quickly to change
the sound.