Ducati Pro-I Evo Black Edition Mode D'emploi page 10

Model Reference picture
Pro-II Plus
DU-MO-210005
DU-MO-210010
DU-MO-220008
DU-MO-220026
Pro-II Plus AS
DU-MO-220020
Pro-II Evo
DU-MO-210009
DU-MO-210012
DU-MO-220005
Pro-II Evo AS
DU-MO-220012
In the package
Accessories:
- Allen keys
- Components for assembly
handlebars (hook, plastic
parts, 4 screws)
- Tyre inflation adapter
- Charger
- Electronic horn
(DU-MO-220012
DU-MO-220020
DU-MO-220026)*
09
Handlebar assembly
Method:
1. Open the kickstand
2. Lift and secure the steering
column by bending the lever
of the folding mechanism
and lower the safety ring (if
present)
3. Install the handlebar on
the shaft
4. Install the hook (see photo)
by approaching it to the rod,
making sure that it is aligned
with the holes, then insert
the screws.
5. Insert the screw on the
outside into the hole located
under the control panel.
6. Tighten the screws.
7. Align the plastic plate (see
photo) with the second hole/
profile of the control panel,
then insert and tighten the
screw.