Standard Accessories - Hitachi M 12V Mode D'emploi Et Instructions De Securite

SPECIFICATIONS
Model
Motor
Power Source
Collet Chuck Capacity
Main Body Stroke
Current
No-Load Speed
Weight (with cord)
ACCESSORIES
WARNING:

STANDARD ACCESSORIES

1. Model M12V(S), M12SA(S)
TYPE A
(1) Wrench (Code No.956923) ............................ 1
(2) Chuck Sleeve
1/4" (6.35mm) (Code No. 956927Z) .............. 1
TYPE B
(1) Straight guide (Code No. 956797) ................ 1
(2) Bar Holder (Code No. 956792) ...................... 1
Feed Screw (Code No. 956793) .................... 1
Wing Bolt (Code No. 94934Z) ....................... 1
(3) Template Guide (Code No. 956790) ............. 1
(4) Wrench (Code No. 956923) ........................... 1
(5) Straight Bit (Tungsten Carbide)
1/2" (12.7mm) (Code No. 956817Z) .............. 1
2. Model M8V(S), M8(S)
TYPE A
(1) Wrench (code No. 971859) ............................ 1
(2) Wing Bolt (A) (M6✕15, for mounting the
guide bars) (Code No. 301806) ..................... 2
TYPE B
(1) Parallel Guide (Code No. 971851) ................ 1
(2) Template Guide (Code No. 956790) ............. 1
(3) Wrench (Code No. 971859) ........................... 1
(4) Straight Bit (Tungsten Carbide) 1/4"
(6.35mm) (Code No. 9718978) ...................... 1
M12V(S)
1/2" (12.7mm)
2-7/16" (62mm)
15A
8000rpm-20000rpm
12.4lbs (5.6kg)
Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
M12SA(S)
Single-Phase, Series Commutator Motor
Single-Phase 115V AC 60Hz
14.6A
22000rpm 10000rpm-25000rpm
12.1lbs (5.5kg) 7.1lbs (3.2kg)
(3) Wing Bolt (A) (M6✕15, for mounting
the guide bars) (Code No.301806) ................ 2
(4) Lock Spring (for mounting the guide bars)
(Code No. 947859) ......................................... 2
(6) Chuck Sleeve 1/4" (6.35mm)
(Code No. 956927Z) ....................................... 1
(7) Template Guide Adartor
(Code No. 956756) ......................................... 1
(8) Wing Bolt (A) (M6✕15, for mounting the
guide bars) (Code No. 301806) ..................... 2
(9) Lock Spring (for mounting the guide bars)
(Code No. 947859) ......................................... 2
(3) Lock Spring (for mounting the guide bars)
(Code No. 947859) ......................................... 2
(5) Template Guide Adaptor (Code No. 956756) ... 1
(6) Wing Bolt (A) (M6✕15, for mounting the
guide bars) (Code No. 301806) ..................... 2
(7) Lock Spring (for mounting the guide bars)
(Code No. 947859) ......................................... 2
M8V(S) M8(S)
1/4" (6.35mm)
2" (50mm)
7.3A 7.3A
25000rpm
6.9lbs (3.1kg)
English
11