Safety; For Using All Power Tools - Hitachi M 12V Mode D'emploi Et Instructions De Securite

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
INPORTANT SAFETY INSTRUCTIONS
FOR USING ALL POWER
WARNING:
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS.
Never place your hands, fingers or other body parts near the tool's moving parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE.
Never operate this tool without all guards or safety features in place and in proper working
order. If maintenance or servicing requires the removal of a guard or safety feature, be sure
to replace the guard or safety feature before resuming operation of the tool.
3. ALWAYS WEAR EYE AND EAR PROTECTOR.
Protect yourself from flying or expelled wood chips, metal particles or other debris by
using protective goggles or equivalent eye protector. Wear ear protector to protect
yourself from excessive noise.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces such as pipes, radiators, ranges and
refrigeration enclosures. Never operate the tool in damp or wet locations.
5. DISCONNECT TOOLS.
Never leave the tool connected to a power source. Always disconnect the tool from its
power source before servicing, inspecting, maintaining, cleaning and before changing or
checking any parts.
6. AVOID UNINTENTIONAL STARTING.
Don't carry the tool while it is connected to its power source. Don't carry the tool with your
finger near the power switch. Be sure the power switch is in the "off" position before
connecting the tool to its power source.
7. STORE TOOL PROPERLY.
When not in use, the tool should be stored in a dry place. Keep out of reach of children.
Lock-out the storage area.
8. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite injuries. Clear all work areas and work benches of
unnecessary tools, debris, furniture, etc.
9. CONSIDER WORK AREA ENVIRONMENT.
Don't expose power tools to rain. Don't use power tools in damp or wet locations. Keep
work area well lit and well ventilated.
Don't use tool in presence of flammable liquids or gases.
Power tools produce sparks during operation. They also spark when switching ON/
OFF. Never use power tools in sites containing lacquer, paint, benzine, thinner,
gasoline, gases, adhesive agents, and other materials which are combustible or
4
explosive.

SAFETY

TOOLSaaaa
Death or serious bodily injury could result from improper or unsafe use
of power tools. To avoid these risks, follow these basic safety
instructions:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M 12vsM 12saM 12sasM 8vM 8vsM 8s

Table des Matières