Baumer IF250 Mode D'emploi page 47

Index Subindex Name
2 – Teach SP1 (System
Command)
2 – Teach SP2 (System
Command)
2 – Teach Apply (Sys-
tem Command)
2 – Teach Cancel (Sys-
tem Command)
Dynamic
2 – Dynamic Teach SP
Start (System Com-
mand)
2 – Dynamic Teach SP
Stop (System Com-
mand)
2 – Teach Apply (Sys-
tem Command)
2 – Teach Cancel (Sys-
tem Command)
Input Scale
1000 – Teach Corner 1
(System Command)
1000 – Teach Corner 2
(System Command)
Value
Data type Access rights range
Uint8 W
Uint8 W
Uint8 W
Uint8 W
Uint8 W
Uint8 W
Uint8 W
Uint8 W
Uint32 W
Uint32 W
Description
Set SP1 at the current position of the object which is within
the scanning range.
Set SP2 at the current position of the object which is within
the scanning range.
Apply teached setpoints.
Cancel teach procedure.
Set SP1 at the current position of the object which is within
the scanning range.
Set SP2 at the current position of the object which is within
the scanning range.
Apply teached setpoints.
Cancel teach procedure.