Baumer IF250 Mode D'emploi page 22

4 | Fonctions
Name
SSC4 Config.Logic
SSC4 Config.Mode
SSC4 Config.Selection
SSC4 Config.Auto Reset
Response Delay.SSC4
Time
Release Delay.SSC4 Time 120
Minimum Pulse Dura-
tion.SSC4 Time
Minimum Pulse Dura-
tion.SSC4 Mode
L'activation de SSC4 Config.Auto Reset permet de créer un compteur pouvant compter les
tailles de lot sans devoir être réinitialisé manuellement. Les filtres temporels tels que le délai de
réponse peuvent contribuer à optimiser le moment d'exécution d'un actionneur en aval.
22
Index Subindex Description
This parameter is only active if SSC is set to
window mode.
16387 1 Changes the Logic from NO to NC.
16387 2 Selection of the switching mode:
n
n
85 31 Selection of source for counter function:
n
n
85 32 Autoreset of switch counter if given switch
counts are reached. If autoreset is switched
from disabled to enabled, the selected switch
counter source is automatically being reset to
zero.
121 32 Sets the response delay time, available for
SSC1, SSC2, SSC3 and SSC4
0 to 60.000 ms
32 Sets the release delay time, available for
SSC1, SSC2, SSC3 and SSC4
0 to 60.000 ms
122 32 Sets the minimum pulse duration, available for
SSC1, SSC2, SSC3 and SSC4
0 to 60.000 ms
122 33 Selects the slope mode.
n
n
n
Single Point
Window
SSC1 Switch Counter
SSC2 Switch Counter
Both Slopes
Positive Slope
Negative Slope
Baumer
IF250 | V1.0