Personnel Qualifications; General Safety Instructions - Aventics LP04 Mode D'emploi

AVENTICS | PROFIBUS DP | R402000616–BDL–001–AF
Improper use of the product includes:
W
is used for any application not named in these instructions,
W
is used under operating conditions that deviate from those
described in these instructions,
W
is changed or converted.
2.4

Personnel qualifications

The work described in this documentation requires basic
electrical and pneumatic knowledge, as well as knowledge of
the appropriate technical terms. In order to ensure safe use,
these activities may therefore only be carried out by qualified
technical personnel or an instructed person under the direction
and supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures, due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant regulations pertaining to
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.
2.5

General safety instructions

W
Observe the regulations for accident prevention and
environmental protection.
W
Observe the safety instructions and regulations of the
country in which the product is used or operated.
W
Only use AVENTICS products that are in perfect working
order.
W
Follow all the instructions on the product.
W
Persons who assemble, operate, disassemble, or maintain
AVENTICS products must not consume any alcohol, drugs,
or pharmaceuticals that may affect their ability to respond.
W
To avoid injuries due to unsuitable spare parts, only use
accessories and spare parts approved by the manufacturer.
29
Notes on Safety