Publicité
Les langues disponibles
Les langues disponibles
>
During the next step you must select via which source the time is to be
synchronised (for more information refer to Section 18.3).
If you have selected [Update from the Net], you must then enter the time
zone and summertime/wintertime.
Depending on the time and date settings, some of the network settings are now
performed.
>
Select whether the WLAN connection should remain active in standby mode
as well. Press the OK button.
>
Ensure that the device is within the reception range of the desired WLAN
network and that you have the access data. In some cases it may be
necessary to carry out some settings on the router. In this case, please refer
to the corresponding instruction manual.
After a search for available wireless networks you are shown the result.
>
Select the desired wireless network and confirm the selection with OK. Select
Skip WPS to enter the password.
If it is a protected network you will be asked to enter the corresponding
access key.
>
To do this, mark the respective character.
>
Enter the selected character by pressing the OK button.
Proceed in this way until the complete access key can be seen in the input
field.
To cancel the input, select
mistake, you can delete the last letter you entered by pressing
>
Then select
correct, a connection to the network is now established.
>
When [Set-up wizard completed] appears on the display, press the OK
button.
18.8 Info
>
Press the MENU button and then select [Main Menu > System Settings >
Info].
>
Confirm by pressing OK.
>
The software version is shown.
>
You can return to the menu by pressing the MENU button.
and press the OK button. If you make a
and press the OK button. If the password entered is
DE
DE
EN
EN
FR
FR
NL
NL
.
73
Publicité
