TechniSat DIGITRADIO 602 Notice D'utilisation page 56

7.4.7 Displays
Current source
Station name,
track, artist,
additional info,
menu, lists
The displays shown can vary depending on the selected function/source. Take
note of the instructions on the display.
8 Menu navigation
Menu navigation primarily takes place using the MENU, /// and OK buttons
on the remote control.
The menu is divided into the respective submenu for the currently selected source
and the main menu. To navigate in submenus, select the corresponding item with
the arrow keys / and select/activate with the OK button or alternatively the 
button to call up/activate. "*" highlights the current selection.
You can go back one step by pressing the BACK or  button.
Closing the menu: Press the BACK or MENU button several times or wait for
approx. 15 seconds.
8.1 Main menu
The main menu takes you to all the functions and settings for the DIGITRADIO 602.
> Press the MENU button to access the main menu.
If you are currently in a playback source, you can use the MENU button to
access the submenu for this source. To reach the main menu while in the
open submenu, use the  or  > Main Menu buttons to select the Main
menu item and press the OK button.
8.2 Selecting the source
> Press the MODE button as often as required until the desired source is shown
on the display.
Alternatively:
> Press the MENU key.
56
Time
Status bar
with reception
strength WLAN
and DAB+/FM,
active alarm
clock, stereo/
mono, etc.