Publicité
Les langues disponibles
Les langues disponibles
12.2 DAB radio reception
>
Press the MODE button as often as required until [DAB Radio] appears on
the display.
Alternatively:
>
Press the MENU button and then select [Main Menu > DAB].
If you are in a submenu, select the Main menu as described in Section 8.1.
If DAB is being started for the first time, a complete station scan is
performed. The station list is then shown (see Section 12.4).
12.3 Scanning
The automatic scan scans all DAB band III channels and thereby finds all stations
being broadcast within the reception area.
>
Press the SCAN button to carry out a full scan. [Scanning] appears in the
display. The scan starts and a progress bar appears in the display.
Alternatively:
>
Press the MENU button and use or to select > [Scanning]. Confirm by
pressing the OK button.
If no stations are found, check the antenna and change the installation
location if necessary (Section 7.3.1).
12.3.1 Manual scan
Proceed as follows if you want to run a station scan manually:
>
Briefly press the MENU button and use the or buttons to select the [Set
Manually] item. Then press the OK button.
>
Use the or buttons to select a station frequency and press the OK
button.
If stations are being broadcast on the selected frequency, this will be
indicated on the stability bar (see also Section 12.8). If these stations are not
currently included in your station list, they will now be stored there.
12.4 Selecting the station
>
Press the keys or to open the station list and select a station.
>
Push the OK button to play the station.
>
Alternatively, you can press the MENU button and use or to select >
[Station list].
DE
DE
EN
EN
FR
FR
NL
NL
59
Publicité
