CEMO KS-Mobil 400 l Manuel D'utilisation page 29

10. Declarations of Conformity
10.2 KS-Mobile with electric pump
EC Conformity Declaration to Machinery Directive 2006/42/EC Appendix II 1.A
The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation: :
Make:
Serial number:
Serial/type designation:
Description:
Mobile filling station (IBC) with double-walled, standing container (as per ADR approval)
of various capacities (400 l, 600 l, 980 l) and electric delivery pump
complies with all relevant specifications from the above-named directive and further applied directives
(see below), including their amendments applicable at the time of the declaration.
The following further EU Directives were applied: 94/9/EC ATEX Directive
The following harmonised standards were applied:
EN 1127-1:2007
EN 13478:2001+A1:2008
EN 60204-1:2006/A1:2009 Safety of machinery - Electrical equipment of machines –
EN 60204-1:2006
EN 61310-1:2008
EN 61310-2:2008
EN 61310-3:2008
EN 809:1998+A1:2009
EN 809:1998+A1:2009
EN ISO 12100:2010
Name and address of the legal entity authorised to assemble the technical documentation:
see above (= manufacturer)
Location: Weinstadt
Date: 26.11.2012
_______________________________
(Signature)
Eberhard Manz, Managing Director CEMO GmbH
All manuals and user guides at all-guides.com
Mobile fuel filling station
CEMO
(7760-7762) + (10257-10260)
KS-MOBIL double-walled
Explosive atmosphere - Explosion prevention -
Part 1: Basic concepts and methodology
Safety of machinery - Fire prevention and protection
Part 1: General requirements (IEC 60204-1:2005/A1:2008)
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:2005 (modified))
Safety of machinery – Indication, marking and actuation –
Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)
Safety of machinery – Indication, marking and actuation –
Part 2: Requirements for marking (IEC 61310-2:2007)
Safety of machinery – Indication, marking and actuation –
Part 3: Requirements for the location and operating of actuators
(IEC 61310-3:2007)
Pumps and pump units for liquids - Common safety requirements
Pumps and pump units for liquids - Common safety requirements
Safety of machinery – General principles of design –
Risk assessment and risk reduction
GB
29