Sartorius ACCULAB ALC Série Mode D'emploi page 12

Example
Determine an unknown piece count; weigh the preset reference sample quantity
Settings (changes in the factory settings required for this example):
Menu: Application program: Counting (menu code 2. 1. 4)
Reference sample quantity: 20 pcs (menu code 3. 3. 3)
Step
1. Turn on the balance/scale
2. Tare the balance/scale
3. Display the reference sample
quantity (here: 20 pcs)
4. Place the reference sample quantity
(20 pcs) on the balance/scale (here: 66 g)
5. Start the application; if the print format
is set to include data ID codes,
the following is printed:
6. Weigh uncounted parts
(here: 174 pcs)
7. Display weight
8. Display quantity
9. Unload the balance/scale
10. Delete the reference value
11. Repeat the procedure starting from step 6, if desired.
12
Key (or instruction)
[ON/OFF]
[ZERO]
[F] >2 sec.
[F]
[F]
[F]
[CAL] > 2 sec.
Display/Printout
0.0 g
(briefly)
ref 20
+ 66.0 g
+ 20 pcs
wRef + 3.300 g
+ 174 pcs
+ 574.2 g
+ 174 pcs
0 pcs