Operating The Balance/Scale; Basic Weighing Function; Preparation - Sartorius ACCULAB ALC Série Mode D'emploi

Operating the Balance/Scale

Basic Weighing Function

Available Features
– Taring the balance/scale
You can tare the balance/scale within the entire weighing range.

Preparation

§ Turn on the balance/scale: Press [ON/OFF]
§ To change configurations: See the chapter entitled "Configuring the Balance/Scale"
§ To load factory-set configurations: See "Configuring the Balance/Scale," parameter 9 – 1
$ To tare the balance/scale: Press [ZERO]
Additional Functions
§ To turn off the balance/scale: Press [ON/OFF]
Example
Basic weighing
Menu code settings: Factory-set codes
Step
1. Turn on the balance/scale
Self-test is performed
2. Place container on balance/
scale (here: 52 g)
3. Tare the balance/scale
4. Place sample in container on
balance/scale (in this example, 150.2 g)
8
Key (or instruction)
[ON/OFF]
[ZERO]
Display/Printout
+ 52.0 g
+ 0.0 g
+ 150.2 g