Balance/Scale Operating Menu (Overview) - Sartorius ACCULAB ALC Série Mode D'emploi

Balance/Scale Operating Menu (Overview)

ο Factory setting
√ User setting
Menu 1. Balance/
scale functions
2. Application
programs
3. Application
parameters
5. Data Interface
1
) = not for models with a readability of 0.1 mg or 1 mg
1.1. Adapt filter
1.3. Stability range
1.4. Weight unit for
calibration weight
1.6. Auto zero
1.7. Weight unit 1
2.1. Program selection
3.1. Weight unit 2
3.3. Reference qty or %
5.2 Parity
5.3 No. of stop bits
5.4 Handshake mode
1.1.1 Minimum vibration
1.1.2 ο Normal vibration
1.1.3 Strong vibration
1.1.4 Extreme vibration
1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
1.3.4 ο 2 digits
1.3.5 4 digits
1.4.1 ο Grams
1
1.4.2 Kilograms )
1.4.3 Pounds
1.6.1 ο On
1.6.2 Off
See "Toggle between Weight Units"
see the desired application program description
see "Toggle between Weight Units"
see the desired application program description
5.2.1 Mark
5.2.2 Space
5.2.3 o Odd
5.2.4 Even
5.3.1 o 1 stop bit
5.3.2 2 stop bits
5.4.1 Software
5.4.2 Hardware,
2 char. after CTS
5.4.3 o Software,
1 char. after CTS
19