Safety Inspection; Instructions For Recycling - Sartorius ACCULAB ALC Série Mode D'emploi

24

Safety Inspection

If there is any indication that safe operation of the balance/scale with the
AC adapter is no longer warranted:
§ Turn off the power and disconnect the equipment from AC power immediately
> Lock the equipment in a secure place to ensure that it cannot be used for the time
being
Safe operation of the balance/scale with the AC adapter is no longer ensured
when:
– there is visible damage to the AC adapter
– the AC adapter no longer functions properly
– the AC adapter has been stored for a relatively long period under unfavorable
conditions
In this case, notify your nearest Acculab Service Center or the International
Technical Support Unit based in Goettingen, Germany. Maintenance and repair
work may only be performed by service technicians who are authorized
by Acculab and who
– have access to the required maintenance manuals
– have attended the relevant service training courses
Instructions for Recycling the Packaging
To ensure adequate protection for safe shipment, your balance/scale has been
packaged to the extent necessary using environmentally friendly materials.
After successful installation of the balance/scale, you should return this packag-
ing for recycling because it is a valuable source of secondary raw material.
For information on recycling options, including recycling of old weighing equip-
ment, contact your municipal waste disposal center or local recycling depot.