Accessories (Options); Marking - Sartorius ACCULAB ALC Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Accessories (Options)

Product
Interface cable for connecting a PC;
25-pin
Calibration weights
– for ALC-80.4 (50 g, E2)
– for ALC-110.4 (100 g; E2)
– for ALC-210.4 (200 g; E2)
– for ALC-150.3 (100 g, E2)
– for ALC-210.3 (200 g; F1)
C Marking
The C marking affixed to the equipment indicates that
the equipment meets the requirements of the following
Directive(s) issued by the Council of the European Union:
Directive 89/336/EEC
"Electromagnetic compatibility (EMC)"
Limitation of Emmissioins:
According to Product Standard EN 61326-1 Cl.B
(Residential environment)
Defined immunity to interference:
According to Peroduct Standard EN 61326-1
(Industrial environment)
Important Note:
The operator shall be responsible for any modifications
to Acculab equipment and for any connections of cables or
equipment not supplied by Acculab and must check and,
if necessary, correct these modifications and connections.
On request, Acculab will provide information on the minimum
operating specifications (in accordance with the Standards
listed above for defined immunity to interference).
Order No.
– for ALC-320.3 (200 g; F1)
7357314
– for ALC-810.2 (500 g, F1)
– for ALC-1100.2 (1 kg; F1)
– for ALC-2100.2 (2 kg; F1)
YCW4528-00
– for ALC-3100.2 (2 kg; F1)
YCW5128-00
– for ALC-2100.1 (1 kg; F2)
YCW5228-00
– for ALC-4100.1 (2 kg; F2)
YCW5128-00
– for ALC-6100.1 (5 kg; F2)
YCW5238-00
Product
Council Directive 73/23/EU
"Electrical equipment designed for use within
certain voltage limits"
Applicable European Standards:
EN 60950
Safety of information technology equipment including
electrical business equipment
EN 61010
Safety requirements for electrical equipment for
measurement,
control and laboratory use
Part 1: General requirements
When you use electrical equipment in installations and
under ambient conditions requiring higher safety
standards, you must comply with the provisions as
specified in the applicable regulations for installation in
your country.
Order No.
YCW5238-00
YCW5538-00
YCW6138-00
YCW6238-00
YCW6238-00
YCW6148-00
YCW6248-00
YCW6548-00
29

Publicité

Table des Matières
loading

Table des Matières