Standard Accessories; Optional Accessories (Sold Separately) - Hitachi Koki DC 120V Mode D'emploi

DIAMOND CORE DRILL SAFETY WARNINGS
1. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
2. Before drilling into a wall, floor or ceiling, thoroughly
confirm that no items such as electric cables or
conduits are buried inside.
SPECIFICATIONS
1
Voltage (by areas)*
Power Input* 1
No-load speed
Capacity Brick, Block*
Steel
Wood
Weight (without cord and side handle)
1
* Be sure to check the nameplate on product as it is subject to change by areas.
2
* When using dry type diamond core bit (Excluding hard brick)

STANDARD ACCESSORIES

(1) Chuck wrench ............................................................. 1
(2) Side handle ................................................................. 1
(3) Case ............................................................................. 1
Standard accessories are subject to change without
notice.

OPTIONAL ACCESSORIES (sold separately)

(1) Diamond Core Bits (Fig. 4-1)
Bit Dia. (mm)
22
28
38
48
(2) Adapter Packs and Extension Rods
Adapter Pack (Fig. 4-2)
Adapter for Dia. 38 – 152 mm core Bits (Fig. 4-3)
Pilot Spigot (Fig. 4-4)
Ejector Drift (Fig. 4-5)
Extention Rod (Length 250 mm) (Fig. 4-6)
2
Length (mm) Bit Dia. (mm)
300
150
3. Always hold the body handle and side handle of the
power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
(110V, 230V, 240V)
900 W
600 – 1400 min
152 mm
Length (mm)
52
65
150
78
91
6
–1
13 mm
30 mm
3.1 kg
Bit Dia. (mm)
107
117
127
152
3
4
5
Fig. 4
English
Length (mm)
150
1
2
4