AERMEC VMF-E5 Manuel D'utilisation page 52

• Assign environment set and band for the chronothermostat function:
Temperatura ambiente
19.9
C
0.7
C
ESC
D
52
GB
6795770_02
c
A
c
B
C
From this window it is possible to:
(1) assign the room air set: used during chronothermostat
function; depending on the season enabled on chiller, the unit will
activate if the air temperature is:
- Higher than the set assigned in this parameter (if SUMMER mode
is activated on the chiller);
- Lower than the set assigned in this parameter (if WINTER mode
is activated on the chiller);
To activate the request of the chiller, the time program selected
for the chiller must give consent to the activation; to set this value,
proceed as follows:
(1) Enter edit mode by pressing the key
this key the digits representing the set temperature will start
to fl ash.
(2) Press the key to increase the value selected, or the key
A
to decrease it;
B
(3) Press the key to confi rm the value entered; once this
C
key is pressed, the set digits will have stopped fl ashing,
indicating that the editing process has been completed;
(2) assign the band on the room air set: the adjustment
on the room set previously assigned involves a band being
applied to the same set (this band is nothing other than the
"tolerance" to be assigned to the room set point); to set the
value of the band, proceed as follows:
(1) Enter edit mode by pressing the key
representing the band start to fl ash;
(2) Press the key A to increase the value selected, or the key
to decrease it;
B
(3) Press the key to confi rm the value entered; once this
C
key is pressed, the set digits will have stopped fl ashing,
indicating that the editing process has been completed;
After completing setting of this function, it will be able to:
- Go to the next window by pressing the key
- Go to the previous window by pressing the key
- Return to the menu selection by pressing the key
C ; after pressing
C until the digits
;
A
;
B
D ;